|
Product Details:
|
| Voltage: | 6.4V | Load Resistance: | 3.3Ohm |
|---|---|---|---|
| Dices (couples): | 127 | Load Output Power: | 3.1Watt |
| High Temp Wire: | 150mm | AC Resistance: | 1.95Ohm |
| High Light: | thermoelectric power generator,thermoelectric peltier generator |
||
3.1 Watt TEG Thermoelectric Generator Dehumidifier Cooling Equipment
Thermoelectric power generating module (TEG) is one kind of power generating device which uses
the Seebeck Effect to convert heat source into electricity directly. It has the characteristics of compact structure, reliable performance, maintenance-free, working without noise, low-carbon and green. The heat source of TEG is extremely extensive. It will generate DC electricity continuously as long as there is temperature difference between both sides of module. Besides thermoelectric material, the factor which affects the generating capacity and conversion efficiency of TEG is the temperature difference. The larger temperature difference, the more generating capacity and higher conversion efficiency will be obtained.
If you are using TEG's or TEC’s in your product or if you use large numbers of these devices we can be of help. We offer more than several decades different models with discount pricing for large quantity purchasers. If you would like our complete product listing or a price quote for large quantity purchases please contact us with your email address.
| Specification: | TEG1-127-1.6-1.4-250 |
| Max Temp of Hotside (deg C) | 250 |
| Cold side Temp (deg C) | <50 |
| Open Circuit Voltage (V) | 6.4 |
| Matched Load Resistance(ohms) | 3.3 |
| Matched load output power (W) | 3.1 |
| AC Resistance(ohms) Measured under 27℃ at 1000Hz |
1.95 |
| TEG Width (mm) | 40.0+/-0.1 |
| TEG Length (mm) | 44.7+/-0.1 |
| TEG thickness (mm) | 3.9+/-0.2 |
| Flatness (mm) | <=0.05 |
| Solder Melt Point (deg C) | 305 |
| Dices (couples) | 127 |
| High temp Wire (20AWG) | 150mm |
Performance Curve
Contact Person: Ms. Jenny yang
Tel: +8613428811822
Fax: 86-20-82898912
